MASIMO RADICAL
Features
Radical is the most advanced, yet flexible pulse oximeter in the world. In addition to being the most feature-packed, stand-alone pulse oximeter available, Radical can operate in two additional modes. The front module of Radical can be removed, creating a fully featured handheld pulse oximeter, ideal for transport. Radical can also be used to upgrade existing equipment through the sensor connector, thus not requiring additional hardware or software upgrades to improve the performance of your current multiparameter monitor to Masimo SET.
- Masimo SET is the proven gold standard in reading through motion & low perfusion to reduce false alarms and detect true eventsThe Radical is a fully featured Standalone pulse oximeter
- The Radical is a fully featured Handheld pulse oximeter
- The Radical interfaces to validated multiparameter patient monitors to replace the existing conventional pulse oximetry with Masimo SET pulse oximetry.
- Unprecedented specificity and sensitivity. Essentially eliminates false alarms and detects virtually all true alarms.
- Accurate during most patient movement, including shivering, combativeness, neonatal movement, and seizures.
- Accurate during low perfusion.
- Accurate during intense ambient light and resists electrocautery interference.
Specifications
Dimensions
- Handheld: 8.9” x 3.3” x 2.1” (22.6 cm x 8.4cm x 5.3 cm)
- Standalone: 3.5” x 10.5” x 7.7” (8.9 cm x 26.7cm x 19.6cm)
- Weight – handheld: 1.3 lbs (0.59 kg)
- Weight Docking station: (models RDS-1, RDS-2, and RDS-3): 2.5 lbs (1.14 kg); (model RDS-1B): 3.1 lbs (1.41 kg)
- Weight – Standalone: (models RDS-1, RDS-2, and RDS-3):3.8 lbs(1.73 kg); (model RDS-1B):4.4 lbs (2.00 kg)
Electrical Power
- Standalone:
- AC Power requirements: 100 – 240 VAC, 47 – 63 Hz
- Power consumption: 55 VA
- Fuses: 1 Amp, Fast Acting, Metric, (5 x 20mm), 250V
- Batteries:
- Handheld Type: NiMH
- Capacity: hours 6
- Charging time: hours 3
- Standalone (Model RDS-1B only)
- Type: NiMH
- Capacity: 12 hours
- Charging time: hours 6
Performance Measurement Range
- SpO2: 1-100%
- Pulse Rate: 5-240 (BPM)
- Perfusion: 0.02% – 20%
Environmental
- Operating Temperature: 41°F to 104°F (5°C to 40°C)
- Storage Temperature: -40°F to 158°F (-40°C to +70°C)
- Operating Humidity: 5% to 95%, non-condensing
- Operating Altitude: 1060 mbar to 500 mbar pressure, -1000 ft to 18,000 ft (-304 m to 5,486 m)
Display / Indicator
- Data display: %SpO2, pulse rate, pleth waveform, perfusion index, alarm status, trends, sensitivity, FastSat, Signal IQ.
- Display color: Blue
- Type: Backlit LCD
- Pixels: 480 x 160 dots
- Dot pitch: 0.25 mm
Output Interface
- Philips Vuelink, Spacelabs Universal Flexport, RadNet TM, (models RDS- 1/1B,RDS-3)
Mode
- Average Mode: 2, 4, 8,10,12,14 or 16 seconds 7
- Sensitivity: Normal, APOD and Maximum 8
Resolution
- Saturation (%SpO2):1%
- Pulse Rate (bpm): 1 bpm
Pulse Rate Accuracy
- Pulse Rate: 25-40 bpm
- No Motion: Adults, Pediatrics, Neonates: ±3 digits
- Motion: Adults, Pediatrics, Neonates: ±5 digits
- Low Perfusion: Adults, Pediatrics, Neonates: ±3 digits
Alarms
- Audible and visual alarms for high and low saturation (1% to 100%), pulse rate (25 – 240bpm), sensor condition, system failure and low battery
Related Products
Masimo Radical 7
Masimo Radical 7
Features
The Masimo Radical 7 is a non-invasive plus oximeter monitor. The Machine can monitor arterial oxygen saturation (SPo2), Pulse rate, and perfusion index. Along with measuring hemoglobin (SpHb)carboxyhemoglobin (SpCO), Total oxygen content (SpOC), methemoglobin (spMET), pleth variability index (PVI), and oxygen reserve index (ORI). The Radical-7 can be used as a standard stand-alone monitor but can also come with the ability to be a handheld monitor. The Pulse oximeter features a touch screen LCD display. This dip can show both numeric value and waveforms for plethysmographic and respiratory.
- Masimo SET clinically proven to satisfy all sensitivity and specificity requirements for pulse oximeter technology.
- Rainbow technology uses 7+ wavelengths of light to conintuously and noninvasively measure SpCO, SpMet, and SpHb on the Radical.
- Respiration rate on the Radical can be determined by the RRa or plethysmographic waveform (RRp).
- FastStat on this Masimo monitor tracks rapid changes in arterial O2.
- Multi-gesture touchscreen interface.
- Automatic screen rotation.
COVIDIEN NELLCOR PM10N
COVIDIEN NELLCOR PM10N
Features
The Covidien Nellcor PM10N is a hand-helps pulse oximeter, making it easy to use for spot-checking and continuous monitoring in a variety of healthcare settings. The PM10N system has a 3 inch color LCD display making it easy to read and deliver accurate and reliable SpO2 and pulse rate measurements. Additionally, the Nellcor MP10N comes with an alarm system that allows you to adjust the limits for high and low SpO2, high and low pulse rate, and Satseconds. The System can be used on patients ranging from neonates to adults.
- Small, lightweight, ergonomic handheld monitor for continuous and spot-check pulse oximetry monitoring
- Supports a robust data set, including real-time SpO2 and PR values, SatSeconds alarm management, pleth waveform, blip bar and tabular trend data
- Supports standard and home-care modes for use in hospital, hospital-type facilities, transport, mobile environments and home-care environments
- Supports Sleep Study Mode, which enables the clinician to dim the LCD display and silence alarms to prevent disruption of patients’ sleep
- Nellcor advanced signal processing technology delivers reliable operation even in difficult monitoring conditions
- LoSat expanded accuracy range (60% to 100% SpO2) when used with Nellcor adhesive sensors with OxiMax technology
- Compatible with the complete line of Nellcor single-patient-use, reusable and specialty sensors with OxiMax technology
- 80 hours of data storage capability
- Supports data export to an external personal computer for data analysis and printing functions
- Warranty 2-years
COVIDIEN NELLCOR PM100N
COVIDIEN NELLCOR PM100N
Features
The Covidien Nellcor PM100N is a Patient Monitor with SpO2 and pulse rate monitoring features. The system can be used in a hospital setting as well as non-hospital settings, home care, and sleep studies. The Nellcor PM100N has the latest Nellcor technology system, allowing for more accurate and reliable readings. The system can hold up to 96 hours of trending data in the memory. Additionally the Nellcor PM100N system comes standard with a SatSecond alarm management system, to help distinguish between meaningful alarms and transient events.
- Displays plethysmographic waveforms, pulse amplitude and real-time SpO2 and pulse rate data
- 96-hour trend memory with data captured every four seconds for quick review of changes in patient status
- Includes SatSeconds™ alarm management, a clinician-controlled feature that has been proven to reduce nuisance alarms
- Password protected homecare and sleep study modes
