PATIENT MONITOR – Meqube https://www.meqube.com Refurbished Medical Equipment Sales and Service Fri, 21 Jan 2022 13:23:04 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.2 https://www.meqube.com/wp-content/uploads/2022/01/cropped-logo-32x32.jpg PATIENT MONITOR – Meqube https://www.meqube.com 32 32 GE DASH 3000 https://www.meqube.com/product/ge-dash-3000/ Fri, 21 Jan 2022 13:19:20 +0000 https://www.meqube.com/?post_type=product&p=704 Features The GE Dash 3000 is a portable patient monitor. Its lightweight, durable design makes it perfect for both transport and bedside monitoring. The Dash 3000 comes with options for wired and wireless networking to the facility's computer systems. The Dash patient monitor can monitor many different parameters at the same time, some of these include 3 to 5 lead ECG, Pulse Oximetry, non-invasive blood pressure, temperature, and cardiac output. The Dash 3000 has an 8.4-inch color LCD screen where you can view 3 or 6 waveforms and battery capacity on the screen all at once. The GE Dash 3000 comes with two batteries that can provide up to 5 hours of running time and can be recharged within 2 to 4 hours. The batteries can be charged one at a time as to lose any functionality of the monitor while charging.
  • Networking options for both wired and wireless
  • 3 to 6 waveform and up to 4 pressure can be views at once
  • 4-5 hours of running battery time
  • Multi-lead ECG analysis and DINAMAP NIBP technology all in one monitor
  • seamless Patient Data transfer to Facilities computer system
]]>

Specifications

Dimensions
  • Height: 10.23 in (26 cm)
  • Depth: 7.8 in (20 cm)
  • Width: 11 in (28 cm)
  • Weight: 12 lbs (5.5 kg)
Display
  • Size: 22 cm (diagonal).
  • Type: active-matrix color TFT.
  • Resolution: 640 x 480 pixels.
  • Number of traces: 6 maximum.
  • Number of seconds/trace: 4.9 at 25 mm/sec.
  • Sweep Speed: 6.25, 12.5, 25 mm/sec (with erase bar).
  • Information window: displays non-real-time information without obstructing the display of real-time information.
  • Display organization: prioritized by parameter.
Controls
  • Trim Knob® control.
  • Five hard keys: Silence Alarm, Graph Go/Stop, NIBP Go/Stop, function (zero all) and Power On/Off.
Alarms
  • Categories: patient status and system status.
  • Priority: 4-levels crisis, warning, advisory, message.
  • Notification: audible and visual.
  • Settings: default or user-defined.
  • Silencing: 1 minute, current alarm only.
  • Pause: 5 minutes in adult ICU mode, 3 minutes in Neonatal ICU mode, and 5, 15, minutes or permanent pause in OR mode.
ECG
  • Standard leads available: I, II, III, V, aVR, aVL, and aVF.
  • Leads analyzed simultaneously: I, II, III and V (multi-lead).
  • Lead fail: identifies failed lead.
  • Alarms: user-selectable upper and lower heart rate limits.
Respiration
  • Measurement technique: impedance variation detection. Range respiration rate: 0-200 breaths per minute. User-selectable upper and lower respiration rate limits, and user-selectable apnea limit.
Temperature
  • Number of channels: 2.
  • Resolution: ±0.1°C.
  • Alarms: user-selectable upper and lower limits for T1, T2.
Invasive Blood Pressure
  • Number of channels: 2.
  • Range: -25mmHg to 300mmHg.
  • Alarms: user-selectable upper and lower limits for systolic, diastolic, and mean pressures.
NIBP
  • Measurement technique: oscillometric.
  • Displayed parameters: systolic, diastolic, and mean pressures, time of last measurement.
  • Measurement modes: manual, auto, and stat in Adult ICU and OR modes, manual and auto in neonatal mode.
  • Systolic range: 30-275 mmHg adult, 30-235 mmHg pediatric, 30-135 mmHg neonate.
  • Diastolic range: 10-220mmHg adult, 10-220mmHg pediatric, 10-110 mmHg neonate.
Pulse Oximetry
  • Parameters monitored: SpO2 and peripheral pulse rate.
  • SpO2 range: 50-100%.
  • PPR range: 30-300 beats per minute.
  • SpO2 accuracy: ±2%, 70 – 100% SpO2, ±3% (50-69% SpO2).
  • PPR Accuracy: ±3 beats per minute.
]]> GE DASH 4000 https://www.meqube.com/product/ge-dash-4000/ Fri, 21 Jan 2022 12:15:53 +0000 https://www.meqube.com/?post_type=product&p=700 Features The GE DASH 4000 is a portable patient monitor that has capabilities to measure ECG, NIBP, SpO2 along with many other perimeters. The Dash 4000 can connect to the GE Carescape network either wired or wireless. The GE Dash 4000 patient monitor comes with a large 10.4-inch color screen. The GE Dash Monitor also offers 12-lead 12sl, EK-Pro arrhythmia, ST-Segment analysis, and A-fib Detection. With these advanced parameters, the GE Dash 4000 can deliver personalized care for each patient's situation. The Dash's lightweight and durable design makes it ideal for any situation including transport, ER, Surgical Centers, and the ICU.
  • Unmatched adaptability at the bedside.
  • Modular flexibility
  • Revolutionary chest pain care
  • Early intervention in the NICU
  • Gold standard NIBP accuracy
  • Options: Agent Monitoring
]]>

Specifications

Dimensions
  • Height: 10.7 in (27.4 cm.)
  • Depth: 9.5 in (24.3 cm.)
  • Width: 11.5 in (29.3 cm.)
  • Weight: 5.7 kg
Display
  • Size: 26 cm (diagonal).
  • Type: active-matrix color TFT.
  • Resolution: 640 by 480 pixels.
  • Number of traces: 6 maximum.
  • Number of seconds/trace: 4.9 at 25 mm/sec.
  • Sweep speed: 6.25, 12.5, 25 mm/sec (with erase bar).
  • Information window: displays non-real-time information without obstructing the display of real-time information.
  • Display organization: prioritized by parameter.
Controls
  • Trim Knob® control.
  • Five hard keys: silence alarm, graph go/stop, function (zero all) and power on/off.
Alarms
  • Categories: patient status and system status.
  • Priority: 4 levels – crisis, warning, advisory, and message.
  • Notification: audible and visual.
  • Setting: default and individual.
  • Silencing: 1 minute, current alarm only.
  • Pause: 5 minutes in adult ICU mode, 3 minutes in neonatal ICU mode, and 5,15, or permanent pause in OR mode.
  • Volume: default 70%, 70 dB measured at 1 meter.
ECG
  • Standard leads available: I, II, III, V, aVR, aVL, and aVF. 10
  • lead wire cable: I, II, III, V, aVR, aVF, V2, V3, V4, V5, V6.
  • Leads analyzed simultaneously: I, II, III, and V (multi-lead mode).
  • Lead fail: identifies failed lead.
  • Alarms: user-selectable upper and lower heart rate limits.
Input Specifications
  • Voltage range: ±0.5 mV to ±5 mV.
  • Signal width: 40 ms to 120 ms (Q to S).
  • Heart rate range: 30 to 300 bpm.
  • Input impedance: common mode > 10 Mat 50/60 Hz, differential > 2.5 Mfrom dc to 60 Hz.
  • Common mode rejection: 90 dB minimum at 50 or 60 Hz
Respiration
  • Measurement technique: impedance variation detection.
  • Range respiration rate: 0 – 200 breaths per minute.
  • Base impedance: 100 – 1000 Ωat 52.6 kHz.
  • Detection sensitivity: 0.4 to 10 Ωvariation.
  • Waveform display bandwidth: 0.1 to 1.8 Hz (-3 dB).
  • Alarms: user-selectable upper and lower respiration limits, and user-selectable apnea limit.
Temperature
  • Number of channels: 2.
  • Input specifications – probe type: YSI series 400 or 700,
  • temperature range: 0°C to 45°C (32°F to 113°F),
  • resolution: ±0.1°C.
  • Output specifications – parameters displayed: T1, T2,
  • accuracy: ±0.1°C for YSI series 4000 probes, ±0.3°C for YSI series 7000 probes, independent of source.
  • Alarms: user-selectable upper and lower limits for T1 and T2.
Invasive Blood Pressure
  • Number of channels: 2 (optional).
  • Transducer sites: arterial, femoral artery, pulmonary arterial, central venous, right atrial, left atrial, intracranial, and special.
  • Transducer requirements: 5 Vdc±0.1% excitation voltage.
  • Transducer output: 5 μV/V/mmHg. Input specifications – range: -25 mmHg to 300 mmHg, offset: ±150 mmHg.
  • Output specifications – frequency response: dc to 50 Hz (-0/+2 Hz).
  • Zero balance range: ±150mmHg.
  • Zero balance accuracy: ±1mmHg.
  • Zero balance drift: ±1mmHg over 24 hours.
  • Accuracy: ±2% or ±1mmHg, whichever is greater.
  • Alarms: user- selectable upper and lower limits for systolic, diastolic, and mean pressures.
NIBP
  • Measurement technique: oscillometric.
  • Displayed parameters; systolic, diastolic, and mean pressures.
  • Systolic: 30-275 mmHg adult, 30-235 mmHg pediatric, and 30-135 mmHg neonate.
  • Diastolic: 10-220 mmHg adult, 10-220 mmHg pediatric, and 10-110 mmHg neonate.
  • MAP: 20-260 mmHg adult, 20-260 mmHg pediatric, and 20-125 mmHg neonate.
  • Pulse rate, as displayed in tabular trends: 30-200 bpm adult, 30-200 bpm pediatric, and 30-200 bpm neonate
Pulse Oximetry
  • Parameters monitored: arterial oxygen saturation (SpO2) and peripheral pulse rate (PPR).
  • SpO2range: 50 –100%. PPR range: 30-300 beats per minute.
  • SpO2 accuracy: ±2% (70-100%) and ±3% (50- 69%).
  • PPR accuracy: ±3 beats per minute.
  • Alarms: user-selectable upper and lower limits for SpO2 and PPR.
CO2
  • Information displayed: inspired and expired CO2 concentrations in %, mmHg, or kPa, respiratory rate, and continuous CO2 waveform.
  • Measurement ranges: PiCO2/FiCO2: 0 to 100 mmHg/0to13%. Pe CO2/ Fe CO2: 0 to 100 mmHg/0 to 13%;
  • RR: 0 to 120 breaths/min.
  • Accuracy: CO2: 5% of reading or ±2 mmHg, whichever is greater.
  • Display resolution: 1 mmHg. Rise time: less than 60 msec.
  • Respiration rate accuracy: ± breath/min
]]> GE DASH 5000 https://www.meqube.com/product/ge-dash-5000/ Fri, 21 Jan 2022 12:01:11 +0000 https://www.meqube.com/?post_type=product&p=695 Features The GE Dash 5000 is a portable patient monitor. It has a built-in writer and can connect to the CARESCAPE network. It can connect with an optional wireless card, or by a wired ethernet connection. This Dash monitor unit can be used to monitor ECG, NIBP, impedance respiration, SpO2, and temperature. This Dash monitor optionally can monitor invasive pressure, BISx, and EtCO2.
  • Mainstream and low-flow sidestream CO2 measurement options for neonatal patients and adults.
  • Highly configurable. Add features and parameters for different acuity levels.
  • Advanced algorithms for all parameters.
  • 12.1-inch display.
  • Multiple mounting solutions.
  • Wired or wireless ECG acquisition.
]]>

Specifications

Dimensions
  • Height: 11.3 in (28.7cm)
  • Width: 12.2 in (30.7 cm)
  • Depth: 9.4 in (23.9 cm)
  • Weight: 14 lbs. (6.4 kg)
Battery
  • Type: Exchangeable Lithium-Ion
  • Number of Batteries: Up to 2
  • Weight: 0.8 lbs (0.36 kg) each
  • Voltage: 11.1 V (nominal)
  • Capacity: 3520 mAh
  • Charge Time: Less than 4 hours each
  • Run Time: 2.5 hours (5.0 hours with 2)
Recorder
  • Method: Thermal dot array
  • Horizontal Resolution: 480 dots/in
  • Vertical Resolution: 200 dots/in
  • Waveform Channels: 4
  • Paper Width: 1.97 in (50 mm)
  • Paper Length: 100 ft (30 m)
  • Paper speed: 0.1, 0.5, 1, 5, 10, 12.5, 25, and 50 mm/sec
Display
  • Size: 12.1 in diagonal
  • Type: Color LCD
  • Resolution: 800×600 pixels
  • Number of Traces: 6
  • Sweep Speed: 6.25, 12.5 or 25 mm/sec
  • Parameter Blocks Displayed: Up to 10
Controls
  • Standard: Trim knob control plus 5 hard keys: Power, NBP Auto, Zero All, Silence Alarm/Admit, Print
ECG
  • 5 Leadwire Cable: I, II, III, V, aVR, aVL, and aVF
  • 10 Leadwire Cable (12SL option): V2, V3, V4, V5 and V6
  • Voltage Range: ±0.5 mV to ±5 mV
  • Signal Width: 40 ms to 120 ms (Q to S)
  • Heart Rate Range: 30 to 300 BPM
  • Accuracy: ±1% or ±1BPM whichever is greater
Invasive Blood Pressure (Optional)
  • Channels: 2
  • Transducer Sites: ART, FEM, PA, CVP, RA, LA, ICP, SP. In neonatal mode UCA, and UVC.
  • Range: -25 mmHg to 300 mmHg
  • Offset: ±150 mmHg
Noninvasive Blood Pressure
  • Technique: Oscillometric
  • Displayed Parameters: Systolic, diastolic, and mean pressures, time of last measurement
  • Modes: Manual, auto, and stat in adult and OR modes; manual and auto in neonatal mode
  • Systolic Pressure Range: Adult: 30 to 285 mmHg; Pediatric: 30 to 235 mmHg; Neonatal: 30 to 140 mmHg
  • Diastolic Pressure Range: Adult: 10 to 220 mmHg; Pediatric: 10 to 210 mmHg; Neonatal: 10 to 110 mmHg
  • Mean Pressure Range: Adult: 20 to 260 mmHg; Pediatric: 20 to 220 mmHg; Neonatal: 20 to 125 mmHg
  • Cuff Pressure Range: Adult: 294 ± 6 mmHg; Pediatric: 250 ± 5 mmHg; Neonatal: 147 ± 3 mmHg
  • Heart Rate Detection: 30 to 200 beats per minute
BIS – Bispectral Index
  • Technology: Supports Aspect Medical BIS-x technology
  • Information Displayed: BIS, SQI, SR and SEF, EEG waveform
  • BIS Range: 0-100
  • Signal Quality Index (SQI) Range: 0-100
  • Suppression Ratio (SR) Range: 0-100%
  • Spectral Edge Frequency (SEF) Range: 0-30
  • Alarms: User selectable upper and lower BIS limits.
SpO2
  • GE Pulse Range: Saturation: Pulse Rate: 0 – 100% SpO2; 30 – 250 beats per minute
  • Masimo SET Range: Saturation: 30 to 100% SpO2; Pulse Rate: 25 to 240 beats per minute; Perfusion: 0.02 to 20%
  • Nellcor Range: Saturation: 1 to 100% SpO2; Pulse Rate: 20 to 250 beats per minute; Perfusion: 0.03 to 20%
Cardiac Output (CO)
  • Range: Cardiac Output: 0.2 – 15 liters per minute; Blood Temperature: 30 – 42°C; Injectate Temperature: 0 – 30°C
Respiration
  • Range: Respiration rate: 0 – 200 breaths per minute; Base impedance: 100 – 1000 Ω at 52.6 kHz excitation frequency; Detection sensitivity: 0.4 to 10 Ω variation
Temperature
  • Temperature Range: 0°C to 45°C (32°F to 113°F)
  • Display Resolution: ±0.1°C
  • Accuracy: ±0.1°C (25°C to 45°C) independent of sensor
Carbon Dioxide (CO2)
  • Measurement Technique: Non-dispersive infrared absorption, dual wavelength ratiometric
  • Sensor Type: Novametrix Medical Systems’ Capnostat III
  • Measurement Ranges: Pi CO2/Fi CO2: 0 to 100 mmHg/0 to 13%; Pe CO2/Fe CO2: 0 to 100 mmHg/0 to 13%; RR: 0 to 120 breaths/min
]]> PHILIPS VM 8 https://www.meqube.com/product/philips-vm-8/ Fri, 21 Jan 2022 11:08:12 +0000 https://www.meqube.com/?post_type=product&p=691 Features The Philips SureSign VM8 is a part of the Philips VM series patient monitors. The VM8 is a compact patient monitor that is only 8 pound, making flexible to fit any situation. The monitor can go from a bedside monitor to a transport monitor in seconds. The monitor can measure multiple parameters; 3-5 lead ECG, SpO2, temperature, non-invasive blood pressure, respiration, and basic arrhythmia. The monitor is used on patients ranging from neonates to adults. The color 10-inch color display screen shows up to 4 different waveforms at a time. The system can store up to 96 hours of trending data. The SureSigns VM 8 comes with a USB port making it easy to maintain and update the software.  
  • A multi-parameter monitor is suitable for use in adult, pediatric and neonatal care settings.
  • The portable design features an integrated bed rail hanger and carrying handle.
  • Bright, easy to read display panel shows up to four waveforms.
  • Fixed keys for quick and efficient operation.
  • Choose between three or five-lead ECG, with pulse detection and safety alarms.
  • Pacemaker and arrhythmia detection
  • Philips SpO2 is compatible with all patient sensors by Nellor or Masimo
  • Various Non-Invasive Blood Pressure modes: manual, interval, and STAT.
  • Store up to 96 hours of measurement trends on one monitor.
  • Complete software upgrades easily with a USB port.
  • Optional — On-board bar-code scanner for quick patient ID entry.
  • Optional — Microstream EtCO2 for intubated and non-intubated patients.
  • Optional — Printer for paper documentation.
]]>

Specifications

Dimensions
  • Height: 10.6 in (27 cm)
  • Width:12.6 in (32 cm)
  • Depth: 6.9 in (17.5 cm)
  • Weight: 3.5 kg (7.7 lbs) excluding optional recorder and CO2
Screen
  • Screen type: 26.4 cm (10.4”) SVGA TFT-AM LCD display
  • Display resolution: 800 active pixels/line, 600 active lines/frame
  • Screen active area: 211.2 mm x 158.4 mm (8.31” x 6.24”)
  • Screen refresh frequency: 60 Hz
  • Pixel size: 0.264 mm (inch)
  • Viewing angle: approx. 60 °
  • Alarm Audio Range: 45 – 85 dB
  • System Response Time: 1 sec
Electrical
  • Internal battery: Lithium-ion, Smart battery 10.9 V to 11.1 V, 7200 mAhr
  • Battery operating time (new, fully charged): 4 hr
  • Battery charge time: 4 hr
  • Internal power supply: 100 to 240 VAC
  • Power consumption: 72 W
  • Frequency: 50/60 Hz
Recorder
  • Recorder type: Thermal
  • Paper width: 58 mm (inch)
  • User Selectable Speeds: 6.25, 12.5, 25, and 50 ml/s
Environmental
  • Mechanical Shock: Complies with mechanical shock requirement in ISO 9919 standards for use within the healthcare facility.
  • Mechanical Vibration: Complies with mechanical vibration requirement in ISO 9919 standards for use within the healthcare facility.
  • Operating temperature: 10 to 40 °C (50 to 104 °F)
  • Storage temperature (device): -20 to 50°C (-4 to 122 °F)
  • Storage temperature (device plus accessories): -20 to 40°C (-4 to 104 °F)
  • Operating humidity: Up to 80% RH, non-condensing
  • Storage humidity: Up to 90% RH, non-condensing
  • Altitude: Up to 3000 meters above sea level
ECG
  • Heart rate range: 15 to 300 beats per minute
  • Heart rate accuracy: Greater of ±10% or ±5 bpm
  • Bandwidth (normal monitoring): 0.67 to 40 Hz
  • Bandwidth (filtered monitoring): 0.67 to 20 Hz
  • Leads: 3-lead and 5-lead (user-selectable)
  • Display sweep speeds: 12.5, 25, and 50 ml/s
  • Pacemaker detection: Indicator on waveform display (user-selectable)
  • ECG size (sensitivity): 2.0, 1.0, 0.5 or 0.25 cm/mV or Auto
  • Lead Off condition: Detected and displayed
  • Input impedance: Signal reduction is less than 20% in the 0.67 to 40 Hz bandwidth
  • Input signal range: ±5 mV
]]> PHILIPS VM 4 https://www.meqube.com/product/philips-vm-4/ Fri, 21 Jan 2022 10:48:12 +0000 https://www.meqube.com/?post_type=product&p=686 Features The Philips SureSigns Vm4 is a portable patient monitor that can also monitor vital signs. The SureSigns VM4 monitor measures ECG, SpO2, non-invasive blood pressure, Hear rate, arrhythmia, pulse rate, temperature, and respiration. The monitor comes with an 8-inch color display screen that can display up to 3 waveforms at once. The patient monitor can store up to 96 hours of trending data. The Philips SureSign VM4 offers 6 hours of continuous battery life before needing to be charged.
  • 8 inch, bright, backlit Led display screen
  • Audible and visual alarms with nurse call output
  • 4 Display Modes: Numeric, Numeric with waveforms, Tabular Trent, Graphical Trend
  • Stores up to 96 hours of trending data
]]>

Specifications

Dimensions
  • Height: 8.6 in ( 22 cm)
  • Width: 10.2 in ( 26 cm)
  • Diameter: 5.7 in ( 14.5 cm)
  • Weight: 3.0 kg (6.6 lbs) excluding optional recorder and temperature module
Physical Specifications
  • Screen type: 21.3 cm (8.4”) SVGA TFT-AM LCD display
  • Display resolution:800 active pixels/line, 600 active lines/frame
  • Screen active area: 170.4 mm x 127.8 mm (6.71” x 5.03”)
  • Screen refresh frequency: 60 Hz
  • Pixel size: 0.213 mm (inch)
  • Viewing angle: approx. 60 °
  • Alarm Audio Range: 45 – 85 dB
  • System Response Time: 1 sec
Electrical Specifications
  • Internal battery: Lithium ion, Smart battery 10.9 V to 11.1 V, 7200 mAhr
  • Battery operating time (new, fully charged): 4 hr
  • Battery charge time: 4 hr
  • Internal power supply: 100 to 240 VAC
  • Power consumption: 72 W Frequency: 50/60 Hz
ECG
  • Heart rate range: 15 to 300 beats per minute
  • Heart rate accuracy: Greater of ±10% or ±5 bpm
  • Bandwidth (normal monitoring): 0.67 to 40 Hz
  • Bandwidth (filtered monitoring): 0.67 to 20 Hz
  • Leads: 3-lead
  • Display sweep speeds: 12.5, 25, and 50 ml/s
  • Pacemaker detection: Indicator on waveform display (user-selectable)
  • ECG size (sensitivity): 2.0, 1.0, 0.5 or 0.25 cm/mV or Auto
  • Lead Off condition: Detected and displayed
  • Input impedance: Signal reduction is less than 20% in the 0.67 to 40 Hz bandwidth
  • Input signal range: ±5 mV
Enviromental Specifications
  • Operating temperature: 10 to 40 °C (50 to 104 °F)
  • Storage temperature (device): -20 to 50°C (-4 to 122 °F)
  • Storage temperature (device plus accessories):-20 to 40°C (-4 to 104 °F) Operating humidity: Up to 80% RH, non-condensing
  • Storage humidity: Up to 90% RH, non-condensing
  • Altitude: Up to 3000 meters above sea level
Temperature Measurements
  • Measurement range – monitored mode: 26.7 to 43.3 °C (80 to 110 °F)
  • Measurement range – predictive mode: 34.4 to 40.6 °C (93.9 to 105 °F)
  • Accuracy (monitored mode): ±0.1 °C (±0.2 °F)
  • Heating/Cooling transient response time: ≤150 sec
  • Measurement time: 4 s (Oral); 16 s (Axillary and rectal) sec
  • Resolution: 0.1 °C (0.2 °F)
SPO2
  • Measurement range: 0 to 100 %
  • Pulse rate: 30 to 300 beats per minute
  • SpO2 accuracy: 70 to 100% (exact accuracy depends on a sensor) %
  • Pulse rate accuracy: Greater of 2% or ±1 bpm
  • Wavelength range: 500 to 1000 nm for all specified sensors nm
  • Maximum optical output power: ≤15 mW for all specified sensors mW
Non-invasive Blood Pressure
  • Technique:Oscillometric using stepwise deflation pressure
  • Adult measurement range – systolic: 30 mmHg to 270 mmHg (4.0 kPa to 36.0 kPa)
  • Initial cuff inflation – Adult: 160 mmHg (21.3 kPa)
  • Adult measurement range – diastolic: 10 mmHg to 245 mmHg (1.3 kPa to 32.7 kPa)
  • Adult measurement range – MAP: 20 mmHg to 255 mmHg (2.7 kPa to 34.0 kPa)
  • Adult measurement range – pulse rate: 40 to 300 beats per minute
  • Pediatric measurement range – systolic: 30 mmHg to 180 mmHg (4.0 kPa to 24.0 kPa)
  • Pediatric measurement range – diastolic: 10 mmHg to 150 mmHg (1.3 kPa to 20.0 kPa)
  • Initial cuff inflation – Pediatric: 140 mmHg (18.7 kPa)
  • Pediatric measurement range – MAP: 20 mmHg to 160 mmHg (2.7 kPa to 21.3 kPa)
]]> PHILIPS VM 6 https://www.meqube.com/product/philips-vm-6/ Fri, 21 Jan 2022 10:20:41 +0000 https://www.meqube.com/?post_type=product&p=681 Features The Philips SureSigns VM6 is a patient monitor that can also do vital signs. The SureSigns VM6 has a small compact design that makes it easy to move with the patient and can be used for all patients, neonates, pediatric and adults. The handheld monitor offers a bright LCD color screen to see all the parameters measured. The Display can show up to 4 different waveforms and numeric readings at once. The parameters include; non-invasive blood pressure, SpO2, Respiration, basic arrhythmia, and 3 or 5 lead ECG. The SureSigns VM6 offers a UBS port for exporting data and updating the internal software.
  • LCD Color Screen
  • Intuitive Navigation; making frequently used test easily available
  • Optional Recorder
  • Lithium Battery
  • Bright, color backlight screen
  • Audio and Visual alarm system
  • 4 display modes: Numeric, Numeric with wave form, Tabular Trend, Graphical Trend
  • Front panel icons show battery status
  • Stores up to 96 hours of trending data
  • Compatible with Adult, Pediatric and Neonatal patients
]]>

Specifications

Dimensions
  • Width: 26 cm
  • Height: 22 cm
  • Depth: 14.5 cm
  • Weight: 7.1 lbs
Display Screen
  • Size: 8.4 in/20.3 cm
  • Type: SVGA TFT-AM LCD
NBP
  • Oscillometric using stepwise deflation pressure
  • Adult/Pediatric Measurement Range: Systolic: 30–255 mmHg; Diastolic: 15–220 mmHg; Mean: 20–235 mmHg
  • Neonatal Measurement Range: Systolic: 30–135 mmHg; Diastolic: 15–110 mmHg; Mean: 20–125 mmHg
  • Blood Pressure Accuracy: ±5 mmHg
  • Pulse Rate Accuracy: ±2 bpm or ±2% (whichever is greater)
IBP (optional)
  • Range: [-40] – 360 mmHg
  • Accuracy: ±4 bpm or ±4% (whichever is greater)
SPo2
  • Meets EN ISO 9919 standard
  • Measurement Range: 0 – 100%
  • Accuracy: Depends on the sensor
ECG
  • 3 or 5-lead
  • Heart Rate Range: 15 – 300 bpm
  • Respiration Rate Range: 4 – 150 rpm
Temperature
  • Mode: Continuous
  • Method: Esophageal, rectal, or skin
  • Range: 25 – 45OC (77.0 – 113.0OF)
  • Accuracy: ±0.1OC
Battery
  • Lithium ion, 11.1V
  • Operating Time: 4 hours with continuous monitoring and NBPs every 15 minutes
Data Output
  • HL7 format, via Ethernet port
Patients
  • Adult, pediatric, neonatal
]]> PHILIPS MP 50 https://www.meqube.com/product/philips-mp-50/ Fri, 21 Jan 2022 09:38:29 +0000 https://www.meqube.com/?post_type=product&p=676 Features The Philips IntelliVue MP50 is a patient monitor that offers a flexible screen configuration to view the patient's vitals. The Philips MP50 can incorporate the Philips Multi-measurement Modules (MMS). With these modules, you can measure 12-lead ECG, arrhythmia analysis, capnography, non-invasive and invasive blood pressure, respiration, cardiac output, temperature, BIS, and SpO2. Along with module configurations that include an anesthesia gas analyzer. The IntelliVue MP50 patient monitor has a 12 inch, touch screen, color LCD Display that can provide high-resolution waveforms and numeric data. The display can show up to 6 waveforms at once. The Patient Monitor has a user interface that makes the IntelliVue fast and easy to operate with color codes information and SmartKey. The system can easily be connected to an intra-hospital network via the IntelliVue portal technology, where the patient's data can be shared to the network Pharmacy, Laboratory, Radiology, and even an ECG management system.
  • Intuitive user interface.
  • Simple menu hierarchy gives fast access to all basic monitoring tasks.
  • Patient data management with tabular and graphic trends.
  • Ventilation, hemodynamic, and oxygenation calculations.
  • Drug Calculator
  • Settings “Profiles” for rapid case turnover.
  • Patented automatic alarm limits help clinicians provide care more efficiently.
  • Basic Event Surveillance for automatic detection of patient status deterioration.
  • Neonatal Event Review keeps a record of rapidly changing condition of neonatal patients.
  • User can freeze waves on the screen and measure parts of the wave using cursors.
  • Bed-to-bed overview provides clinicians with an overview of all the patient beds in their care.
  • User can silence alarms from remote beds.
  • User can assign a monitor and a telemetry device to the same patient. The telemetry data can be displayed as a fixed monitor overview session on the monitor.
  • Choice of input devices: touchscreen, navigation point, remote control, mouse, trackball, barcode reader, keyboard or remote SpeedPoint.
  • 12" TFT flat panel display with SVGA resolution, wide viewing angle, large numerics, permanently visible alarm limits, and up to six realtime waves.
  • Capable of functioning in a wireless infrastructure.
  • Graphical measurement window shows which measurements are being measured by which device, making it easier to resolve measurement label conflicts.
  • Timer application allows you to set timers to notify you when a specific time period has expired.
]]>

Specifications

Dimensions
  • Height: 12.99″ (33 cm)
  • Width: 14.37″ (36.5 cm)
  • Depth: 8.54″ (21.7 cm)
  • Weight: < 14.8 lbs (8.6 kg)
Display
  • Size (Diagonal): 12.1″ (30.73 cm)
  • Resoltuion: 800 x 600
  • Refresh rate: 60 Hz
  • Useful Screen: 9.6″ x 7.2″ (24.6 x 18.4 cm)
  • Pixel Size: 0.3075 x 0.3075 mm
Power
  • Power Consumption: < 100W
  • Line Voltage: 100 to 240 V ~
  • Current: 1.6 to 0.7 A
  • Frequency: 50/60 Hz
Performance
  • Sweep Speed: 6.25, 12.5, 25, and 50 mm/s with ±5% accuracy
  • Trends: 12 or 16 numerics @ 12 sec, 1 minute, 5 minute resolution. Multiple choices of number of numerics, resolution, and duration depending on application area
  • Neonatal Event Review
    • Information: trigger condition and time, event classification and associated detailed view of episode data
    • Episode data: configurable, includes all current numerics, alarms and inops, and 4 minutes of high resolution trend
    • Capacity (max): 25 or 50 events for 8 or 24 hours
  • Buffered Memory
    • Contents: Active settings, trends, snapshots, events, review alarms
    • Hold Time: infinite if powered by AC; otherwise at least 48 hours (typical: >72 hours)
Environmental Conditions
  • Temperature Range
    • Operating: 0 to 35oC (32 to 95oF)
    • Non-operating: -20 to 60oC (-4 to 140oF)
  • Humidity Range:
    • Operating: 20% to 85% Relative Humidity (RH) (non condensing)
    • Non-operating: 5% to 85% Relative Humidity (RH)
  • Altitude Range
    • Operating: 0 m to 3000 m (10000 ft)
    • Non-operating: 0 m to 12000 m (40000 ft)
  • BatteryStorage: -20 to 50oC (-4 to 122oF)
Battery
  • Type: High-power battery M4605A, 10.8 V 6000 mAh Lithium Ion
  • Weight: 490 g per battery
  • Status LEDs indicate charge status of batteries
  • Safety: complies with UL1642 (UL recognised)
  • Electromagnetic compatibility: complies with the requirements for FCC Type B computing Device, and EN 61000-4-2 and EN 61000-3
  • Communication Standard: complies with the SMBus specification v1.1
  • Battery Operating Time (New and fully loaded battery)
      • With basic monitoring configuration: 5 hours (brightness set to optimum, MMS connected, NBP measurement every 15 minutes)
      • With extended monitoring configuration: 4 hours (brightness set to optimum, MMS and MMS extension connected, NBP every 15

    minutes, Recorder, Pressure, Temperature modules connected)

  • Battery Charge Time:
    • When monitor is switched off: 4 hours
    • When monitor is in use: 5 to 12 hours, depending on monitor configuration
]]> PHILIPS MP 70 https://www.meqube.com/product/philips-mp-70/ Fri, 21 Jan 2022 09:21:28 +0000 https://www.meqube.com/?post_type=product&p=672 Features The Philips IntelliVue MP70 is a patient Monitor that was designed to monitor a variety of parameters on a flexible screen configuration. The MP70 can be connected to the Multi-Measurement Modules. The Monitor has two slots for the modules. These Modules include; anesthesia, Critical, Cardiac, neonatal care, and general care units. The Patient Monitor has a 15-inch color LCD touch screen display that can show up to eight different waveforms at once. Along with displaying 12 lead ECG.
  • Touchscreen and SpeedPoint operation
  • Customizable viewing options with 10 pre-set screen configurations
  • Uninterrupted patient monitoring
  • Bright and easy to read color display
  • Space-saving, quiet, and stable
  • Fast startup
]]>

Specifications

Dimensions
  • Height: 14.17″ (36 cm)
  • Width: 15.95″ (40.5 cm)
  • Depth: 6.69″ (17 cm)
  • Weight: 22.05 lbs (10 kg)
Display
  • Type: XGA
  • Resolution: 1024 x 768
  • Refresh Rate: 60 Hz
  • Size: 15″ (38.1 cm)
Power
  • Power Consumption: <145 W
  • Line Voltage: 100 to 240 V ~
  • Current: 1.6 to 0.7 A
  • Frequency: 50/60 Hz
Sweep Speeds
  • 6.25, 12.5, 25, and 50 mm/s
  • Accuracy: +/- 5% Accuracy
Sounds
  • Audible feedback for user input.
  • Prompt tone.
  • Two different QRS tones, SpO2
Events
  • Information: Trigger conditioning and time, event classification and associated detailed view of episode data.
  • Episode Data: Configurable, includes all numerics, alarms, inops, and either: 4 minutes of high-resolution trend or 20 minutes of numerics trend @ 12 sec. resolution or 15 seconds of 4 waves @ 125 samples/sec.
  • Capacity (Max.): 25 or 50 events for either 8 or 24 hours.
Environmental Specifications
  • Operating Temperature: 0 to 35 °C (32 to 95 °F)
  • Non-operating Temperatuer: -20 to 60 °C (-4 to 140 °F)
  • Battery Storage Temperature: -20 to 50 °C (-4 to 122 °F)
Advanced Event Surveillance
  • Events are electronic records of episodes in the patient’s condition
  • They can be used to drive alert notifications to assist compliance with any protocol that is being used by the clinician.
Mouse
  • Any specified PS/2 mouse or trackball may be used for data entry
Recordings

Using the plug-in recorder record numerics for all active measurements and up to three waveforms can be documented. It can be used for local recording in either the FMS or the integrated module slots. Report templates can be defined in advance, enabling print-outs tailored to each hospital’s specific requirements to be started quickly. They can be printed locally or centrally – connected printers and they can be initiated manually or automatically at user-defined intervals.

An extensive range of patient reports can be printed:

  • Event Review and Episode Reports
  • 12-Lead ECG reports
  • Vital signs
  • Graphic trends
  • Cardiac output reports
  • Wedge procedure reports
  • Calculation reports
  • EEG reports
  • Loop reports
Patient Transfers
  • The Universal Admit, Discharge, and Transfer (ADT) feature mean that all ADT information is shared between the networked monitoring and the information center. Information only needs to be entered once.
  • Patients can be transferred by disconnecting the MMS or X2 from a monitor and then reconnecting it to a new monitor. Patient demographics are stored in the MMS and the X2, so they do not have to be re-entered on the new monitor.
Drug Calculator
  • The drug calculator allows you to calculate the fourth value when three of the following values are entered: dose, amount, volume, the rate of infusion.
  • A titration table and drip table can be displayed and printed.
  • The drug calculator can also be configured to include a list of commonly used drugs using the support tool.
]]>