GE DASH 5000

Features

The GE Dash 5000 is a portable patient monitor. It has a built-in writer and can connect to the CARESCAPE network. It can connect with an optional wireless card, or by a wired ethernet connection. This Dash monitor unit can be used to monitor ECG, NIBP, impedance respiration, SpO2, and temperature. This Dash monitor optionally can monitor invasive pressure, BISx, and EtCO2.

Mainstream and low-flow sidestream CO2 measurement options for neonatal patients and adults.
Highly configurable. Add features and parameters for different acuity levels.
Advanced algorithms for all parameters.
12.1-inch display.
Multiple mounting solutions.
Wired or wireless ECG acquisition.

Specifications

Dimensions

Height: 11.3 in (28.7cm)
Width: 12.2 in (30.7 cm)
Depth: 9.4 in (23.9 cm)
Weight: 14 lbs. (6.4 kg)

Battery

Type: Exchangeable Lithium-Ion
Number of Batteries: Up to 2
Weight: 0.8 lbs (0.36 kg) each
Voltage: 11.1 V (nominal)
Capacity: 3520 mAh
Charge Time: Less than 4 hours each
Run Time: 2.5 hours (5.0 hours with 2)

Recorder

Method: Thermal dot array
Horizontal Resolution: 480 dots/in
Vertical Resolution: 200 dots/in
Waveform Channels: 4
Paper Width: 1.97 in (50 mm)
Paper Length: 100 ft (30 m)
Paper speed: 0.1, 0.5, 1, 5, 10, 12.5, 25, and 50 mm/sec

Display

Size: 12.1 in diagonal
Type: Color LCD
Resolution: 800×600 pixels
Number of Traces: 6
Sweep Speed: 6.25, 12.5 or 25 mm/sec
Parameter Blocks Displayed: Up to 10

Controls

Standard: Trim knob control plus 5 hard keys: Power, NBP Auto, Zero All, Silence Alarm/Admit, Print

ECG

5 Leadwire Cable: I, II, III, V, aVR, aVL, and aVF
10 Leadwire Cable (12SL option): V2, V3, V4, V5 and V6
Voltage Range: ±0.5 mV to ±5 mV
Signal Width: 40 ms to 120 ms (Q to S)
Heart Rate Range: 30 to 300 BPM
Accuracy: ±1% or ±1BPM whichever is greater

Invasive Blood Pressure (Optional)

Channels: 2
Transducer Sites: ART, FEM, PA, CVP, RA, LA, ICP, SP. In neonatal mode UCA, and UVC.
Range: -25 mmHg to 300 mmHg
Offset: ±150 mmHg

Noninvasive Blood Pressure

Technique: Oscillometric
Displayed Parameters: Systolic, diastolic, and mean pressures, time of last measurement
Modes: Manual, auto, and stat in adult and OR modes; manual and auto in neonatal mode
Systolic Pressure Range: Adult: 30 to 285 mmHg; Pediatric: 30 to 235 mmHg; Neonatal: 30 to 140 mmHg
Diastolic Pressure Range: Adult: 10 to 220 mmHg; Pediatric: 10 to 210 mmHg; Neonatal: 10 to 110 mmHg
Mean Pressure Range: Adult: 20 to 260 mmHg; Pediatric: 20 to 220 mmHg; Neonatal: 20 to 125 mmHg
Cuff Pressure Range: Adult: 294 ± 6 mmHg; Pediatric: 250 ± 5 mmHg; Neonatal: 147 ± 3 mmHg
Heart Rate Detection: 30 to 200 beats per minute

BIS – Bispectral Index

Technology: Supports Aspect Medical BIS-x technology
Information Displayed: BIS, SQI, SR and SEF, EEG waveform
BIS Range: 0-100
Signal Quality Index (SQI) Range: 0-100
Suppression Ratio (SR) Range: 0-100%
Spectral Edge Frequency (SEF) Range: 0-30
Alarms: User selectable upper and lower BIS limits.

SpO2

GE Pulse Range: Saturation: Pulse Rate: 0 – 100% SpO2; 30 – 250 beats per minute
Masimo SET Range: Saturation: 30 to 100% SpO2; Pulse Rate: 25 to 240 beats per minute; Perfusion: 0.02 to 20%
Nellcor Range: Saturation: 1 to 100% SpO2; Pulse Rate: 20 to 250 beats per minute; Perfusion: 0.03 to 20%

Cardiac Output (CO)

Range: Cardiac Output: 0.2 – 15 liters per minute; Blood Temperature: 30 – 42°C; Injectate Temperature: 0 – 30°C

Respiration

Range: Respiration rate: 0 – 200 breaths per minute; Base impedance: 100 – 1000 Ω at 52.6 kHz excitation frequency; Detection sensitivity: 0.4 to 10 Ω variation

Temperature

Temperature Range: 0°C to 45°C (32°F to 113°F)
Display Resolution: ±0.1°C
Accuracy: ±0.1°C (25°C to 45°C) independent of sensor

Carbon Dioxide (CO2)

Measurement Technique: Non-dispersive infrared absorption, dual wavelength ratiometric
Sensor Type: Novametrix Medical Systems’ Capnostat III
Measurement Ranges: Pi CO2/Fi CO2: 0 to 100 mmHg/0 to 13%; Pe CO2/Fe CO2: 0 to 100 mmHg/0 to 13%; RR: 0 to 120 breaths/min