ZIMMER ATS 4000

The Zimmer ATS 4000 is a tourniquet system that is used to temporarily occlude blood flow in the patient’s extremities during a surgical procedure. The ATS 4000 was designed to offer individual levels of pressure for each patient. Delivering a variety of pressures at specific times and for specific limbs. The Zimmer ATS 4000 offers a dual cuff that can prevent accidental cuff release with an automatic IVRA Cuff Lock – making sure deflating is intended on the second cuff. Zimmer offers lower tourniquet pressure to help minimize the risk of nerve-related injuries and less post-op pain.

Personalized Pressure Technology
Touchscreen User Interface
8.4″ Color Display
Self-check Calibration: automatically checks the accuracy of the machine calibration each time the unit is powered on. This saves setup time.
Cuff Alert: alerts user of cuff status when attempt is made to set the machine to stand-by.
Cuff Lockout: feature prompts the user to confirm the deflation command during bilateral or IVRA procedures in order to reduce complications due to sudden cuff deflation.
Six-hour Lithium Ion Battery Backup: maintains pressure if AC power is temporarily lost.
Color-Coded Cuffs: from 8 inches to 42 inches accommodate virtually all patients and limbs.
Carrying Handle: makes the system easy to transport, and includes pull-out hangers for storage of cuffs and hoses. The lightweight, portable unit can be mounted on an IV pole or placed on a table.
Innovative Limb Occlusion Pressure (LOP) feature
Uses ambient air
Uses electronic and microprocessor regulated pressure
Dual Port, Dual Cuff system: for simultaneous use of two dual port cuffs each with offering independent pressure and time regulation
Facilitates dual port, dual bladder cuff usage for IVRA/Bier Block procedures
Uses dedicated ports for supplying and measuring pressure which allows for fast and precise pressure regulations
Visual and audible alarms activated when an unsafe condition is detected

Limb Occlusion Pressure (LOP)

Technology that’s designed to calculate a patient’s pressure at an individual level and apply a minimum amount of tourniquet pressure needed to occlude a limb at a specific time for a specific patient. Lower tourniquet cuff pressure reduces postoperative wound complications after TKA.

Touch Screen

An 8.4” color touchscreen that increases visibility to read across operating rooms.
Other great features including a 6 hour lithium Ion battery and dual ports

Advanced Leak Detection

Technology that monitors a cuff for minor variations intraoperatively with the intention of reporting potential cuff/hose leaks.

Pre-op Cuff Test

Technology that allows for bedside testing of cuff pre-operatively to ensure proper function

Specifications

Dimensions

Height:13.1 in (33.3 cm)
Width: 9.3 in (23.6 cm)
Depth: 10.5 in (26.7 cm)
weight: 13.2 lbs (6kg)

Timer

Time Alarm Set Range: 1 – 240 minute; 1 minute increments
Timer Accuracy: 0.25% of elapsed time

Power

Line Voltage Range: 100 – 240 VAC, 50/60 Hz, Auto Switching
Line Current: 1000 mA RMS @ 120 VAC
Input Power: 53 Watts Typical
Power Cord: Type SJT, AWG 16, 14 ft. (4.27 m)
Power Plug: Hospital grade, 3 prong straight blade, 15 Amp

Pressure

Cuff Pressure Range: 50 – 400 mmHg, 1 mmHg increments
Extended Cuff Pressure Range: 401 – 600 mmHg, 1 mmHg increments. A yellow tile will appear requesting confirmation to exceed 400 mmHg pressure
Pressure Accuracy: ±3 mmHg (50 – 600 mmHg)
Pressure Regulation: ±4 mmHg of set point (10 second average under non-transient conditions without external leaks)
Maximum Pressures: 400 mmHg per cuff | 600 mmHg per cuff in extended range

Battery

Battery Type: Rechargeable, 14.4 VDC, Li-Ion, 4.3 Amp hours
Battery Discharge Time: Unit will operate on battery power for 360 minutes minimum with fully charge batteries
Battery Recharge Time: 10 hours (Maximum). Unit should be plugged in 10 hours before initial use.