Products – Meqube https://www.meqube.com Refurbished Medical Equipment Sales and Service Fri, 21 Jan 2022 14:37:13 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.2 https://www.meqube.com/wp-content/uploads/2022/01/cropped-logo-32x32.jpg Products – Meqube https://www.meqube.com 32 32 COVIDIEN NELLCOR PM100N https://www.meqube.com/product/covidien-nellcor-pm100n/ Fri, 21 Jan 2022 14:26:33 +0000 https://www.meqube.com/?post_type=product&p=722 Features The Covidien Nellcor PM100N is a Patient Monitor with SpO2 and pulse rate monitoring features. The system can be used in a hospital setting as well as non-hospital settings, home care, and sleep studies. The Nellcor PM100N has the latest Nellcor technology system, allowing for more accurate and reliable readings. The system can hold up to 96 hours of trending data in the memory. Additionally the Nellcor PM100N system comes standard with a SatSecond alarm management system, to help distinguish between meaningful alarms and transient events.
  • Displays plethysmographic waveforms, pulse amplitude and real-time SpO2 and pulse rate data
  • 96-hour trend memory with data captured every four seconds for quick review of changes in patient status
  • Includes SatSeconds™ alarm management, a clinician-controlled feature that has been proven to reduce nuisance alarms
  • Password protected homecare and sleep study modes
]]>

Specifications

Dimensions
  • Weight: 1.5 kg (3 lbs)
  • Size: 82 H x 255 W x 155 D (mm), (3.23 H x 10.04 W x 6.10 D (in)
Operating Temperature
  • Instrument: 5 °C to 40 °C (41 °F to 104 °F)
  • Transport/Storage Temperature (in shipping carton): -20 °C to 60 °C (-4 °F to 140 °F)
Operating Humidity
  • 15% to 93% noncondensing
Operating Altitude
  • -170 m to 4877 m (-557 ft to 16,000 ft)
Battery
  • Type: Lithium ion
  • Battery Capacity: Minimum of five hours using new, fully charged battery with no alarms; optional 10-hour battery
Electrical
Instrument
  • Power requirements: 100 to 240 VAC, 50/60 Hz, 45 VA
  • Fuse Rating: Fast‑acting 2 A 32VAC/DC, Fast‑acting 500 mA 32VAC/50DC
Saturation
  • Adult: 70% to 100% ± 2 digits
  • Adult and Neonate: low sat 60% to 80% ± 3 digits
  • Neonate: 70% to 100% ± 2 digits
  • Low Perfusion: 70% to 100% ± 2 digits
  • Adult and Neonate with Motion: 70% to 100% ± 4 digits
Pulse Rate
  • Adult and Neonate: 20 to 250 bpm ± 3 digits
  • Low Perfusion: 20 to 250 bpm ± 3 digits
  • Adult and Neonate with Motion: 20 to 250 bpm ± 5 digits
Performance
  • Measurement Range SpO2: 1% to 100%
  • Pulse rate: 20 to 250 beats per minute (bpm)
  • Pulse amplitude: 0.03% to 20%
]]> COVIDIEN NELLCOR PM10N https://www.meqube.com/product/covidien-nellcor-pm10n/ Fri, 21 Jan 2022 14:20:04 +0000 https://www.meqube.com/?post_type=product&p=717 Features The Covidien Nellcor PM10N is a hand-helps pulse oximeter, making it easy to use for spot-checking and continuous monitoring in a variety of healthcare settings. The PM10N system has a 3 inch color LCD display making it easy to read and deliver accurate and reliable SpO2 and pulse rate measurements. Additionally, the Nellcor MP10N comes with an alarm system that allows you to adjust the limits for high and low SpO2, high and low pulse rate, and Satseconds. The System can be used on patients ranging from neonates to adults.
  • Small, lightweight, ergonomic handheld monitor for continuous and spot-check pulse oximetry monitoring
  • Supports a robust data set, including real-time SpO2 and PR values, SatSeconds alarm management, pleth waveform, blip bar and tabular trend data
  • Supports standard and home-care modes for use in hospital, hospital-type facilities, transport, mobile environments and home-care environments
  • Supports Sleep Study Mode, which enables the clinician to dim the LCD display and silence alarms to prevent disruption of patients’ sleep
  • Nellcor advanced signal processing technology delivers reliable operation even in difficult monitoring conditions
  • LoSat expanded accuracy range (60% to 100% SpO2) when used with Nellcor adhesive sensors with OxiMax technology
  • Compatible with the complete line of Nellcor single-patient-use, reusable and specialty sensors with OxiMax technology
  • 80 hours of data storage capability
  • Supports data export to an external personal computer for data analysis and printing functions
  • Warranty 2-years
]]>

Specifications

Dimensions
  • Size: 2.76 W x 6.14 H x 1.26 D inches (70 x 156 x 32 mm)
  • Weight (w/ Batteries): 0..604 lbs (274 g)
Performance
  • SpO2 Saturation Range: 1% – 100%
  • Heart (Pulse) Rate Range: 20 – 250 bpm
  • Perfusion Range: 0.03% to 20%
  • Display Sweep Speed: 6.25 mm/sec
  • Memory: Saves total of 80 hours data events; Date, Time, Alarm Conditions, Pulse Rate and SpO2 measurements
  • Measurement Accuracy:
    • Saturation
    • Adult: 70% to 100% ± 2 digits
    • Adult and Neonate Low Sat: 60 to 80% ±3 digits
    • Neonate: 70 to 100% ±2 digits
    • Low Perfusion: 70 to 100% ±2 digits
    • Adult and Neonate with Motion: 70 to 100% ±3 digits
    • Pulse Rate
    • Adult and Neonate: 20 to 250 bpm ±3 digits
    • Low Perfusion: 20 to 250 bpm ±3 digits
    • Adult and Neonate with Motion: 20 to 250 bpm ±5 digits
Physical Characteristics
  • Display Screen Size: 3.5 in (88.9 mm) measured diagonally
  • Display Screen Type: TFT LCD, white LED backlight, viewing cone of 60° and optimal viewing distance of 1 meter
  • Display Resolution: 320 x 480 pixels
  • Display: Oxygen saturation, pulse rate, perfusion
  • Indicators: Pulse amplitude, pulse search, low battery, alarm silence, interference, data in sensor, sensor disconnect, print.
Alarm
  • Categories: Patient Status and System Status
  • Priorities: Low, Medium and High
  • Notifications: Audible and Visual
  • Setting: Default, Institutional and Last Setting
  • Alarm Volume Level: 49 to 89 dB
  • Alarm System Delay: <10s
  • Power Characteristics:
    • Battery: 4 x Type Lithium AA 1.5V or rechargeable batteries
    • Operation Time: Typically 20 hours with no external communication, no
    • audible alarm sound and an ambient temperature of 25° C
]]> Masimo Radical 7 https://www.meqube.com/product/masimo-radical-7/ Fri, 21 Jan 2022 13:45:22 +0000 https://www.meqube.com/?post_type=product&p=713 Features The Masimo Radical 7 is a non-invasive plus oximeter monitor. The Machine can monitor arterial oxygen saturation (SPo2), Pulse rate, and perfusion index. Along with measuring hemoglobin (SpHb)carboxyhemoglobin (SpCO), Total oxygen content (SpOC), methemoglobin (spMET), pleth variability index (PVI), and oxygen reserve index (ORI). The Radical-7 can be used as a standard stand-alone monitor but can also come with the ability to be a handheld monitor. The Pulse oximeter features a touch screen LCD display. This dip can show both numeric value and waveforms for plethysmographic and respiratory.
  • Masimo SET clinically proven to satisfy all sensitivity and specificity requirements for pulse oximeter technology.
  • Rainbow technology uses 7+ wavelengths of light to conintuously and noninvasively measure SpCO, SpMet, and SpHb on the Radical.
  • Respiration rate on the Radical can be determined by the RRa or plethysmographic waveform (RRp).
  • FastStat on this Masimo monitor tracks rapid changes in arterial O2.
  • Multi-gesture touchscreen interface.
  • Automatic screen rotation.
]]>

Specifications

Dimensions
  • Handheld
    • Height: 8.9” (22.6 cm)
    • Width: 3.5” (8.9 cm)
    • Depth: 2.1” (5.3 cm)
    • Weight: 1.2 lbs (0.54 kg)
  • Standalone
    • Height: 3.5” (8.9 cm)
    • Width: 10.5 (26.7 cm)
    • Depth: 7.7” (19.6 cm)
    • Weight: 3.8 lbs (1.73 kg)
Display
  • Display Update Rate: 1 second
  • Response Time: < 20 second delay
  • Type: Backlit Active Matrix TFT LCD
  • Pixels: 480 dots x 272 dots
  • Dot Pitch: 0.25 mm
Measurement Ranges
  • SpO2 (Oxygen Saturation): 0% to 100%
  • SpMet (Methemoglobin): 0% to 99.9%
  • SpCO (Carboxyhemoglobin): 0% to 99%
  • SpHb (Hemoglobin): 0 g/dL to 25.0 g/dL
  • SpOC (Oxygen Content): 0 ml of O2/dL to 35 ml of O2/dL of blood
  • PR (Pulse Rate): 25 bpm to 240 bpm
  • PI (Perfusion Index): 0.02% to 20%
  • PVI (Pleth Variability Index): 0% to 100%
  • RRa (Respiration Rate): 0 breaths per minute to 70 breaths per minute
Resolution
  • %SpO2: 1%
  • %SpCO: 1%
  • %SpMet: 0.1%
  • SpHb g/dL: 0.1 g/dL
  • Pulse Rate: 1 beats per minute
  • Respiration Rate: 1 breath per minute
Battery
  • Type: Lithium ion
  • Capacity: 4 hours
  • Time: 3 hours
]]> MASIMO RADICAL https://www.meqube.com/product/masimo-radical/ Fri, 21 Jan 2022 13:33:12 +0000 https://www.meqube.com/?post_type=product&p=708 Features Radical is the most advanced, yet flexible pulse oximeter in the world. In addition to being the most feature-packed, stand-alone pulse oximeter available, Radical can operate in two additional modes. The front module of Radical can be removed, creating a fully featured handheld pulse oximeter, ideal for transport. Radical can also be used to upgrade existing equipment through the sensor connector, thus not requiring additional hardware or software upgrades to improve the performance of your current multiparameter monitor to Masimo SET.
  • Masimo SET is the proven gold standard in reading through motion & low perfusion to reduce false alarms and detect true eventsThe Radical is a fully featured Standalone pulse oximeter
  • The Radical is a fully featured Handheld pulse oximeter
  • The Radical interfaces to validated multiparameter patient monitors to replace the existing conventional pulse oximetry with Masimo SET pulse oximetry.
  • Unprecedented specificity and sensitivity. Essentially eliminates false alarms and detects virtually all true alarms.
  • Accurate during most patient movement, including shivering, combativeness, neonatal movement, and seizures.
  • Accurate during low perfusion.
  • Accurate during intense ambient light and resists electrocautery interference.
]]>

Specifications

Dimensions
  • Handheld: 8.9” x 3.3” x 2.1” (22.6 cm x 8.4cm x 5.3 cm)
  • Standalone: 3.5” x 10.5” x 7.7” (8.9 cm x 26.7cm x 19.6cm)
  • Weight – handheld: 1.3 lbs (0.59 kg)
  • Weight Docking station: (models RDS-1, RDS-2, and RDS-3): 2.5 lbs (1.14 kg); (model RDS-1B): 3.1 lbs (1.41 kg)
  • Weight – Standalone: (models RDS-1, RDS-2, and RDS-3):3.8 lbs(1.73 kg); (model RDS-1B):4.4 lbs (2.00 kg)
Electrical Power
  • Standalone:
    • AC Power requirements: 100 – 240 VAC, 47 – 63 Hz
    • Power consumption: 55 VA
    • Fuses: 1 Amp, Fast Acting, Metric, (5 x 20mm), 250V
  • Batteries:
    • Handheld Type: NiMH
    • Capacity: hours 6
    • Charging time: hours 3
  • Standalone (Model RDS-1B only)
    • Type: NiMH
    • Capacity: 12 hours
    • Charging time: hours 6
Performance Measurement Range
  • SpO2: 1-100%
  • Pulse Rate: 5-240 (BPM)
  • Perfusion: 0.02% – 20%
Environmental
  • Operating Temperature: 41°F to 104°F (5°C to 40°C)
  • Storage Temperature: -40°F to 158°F (-40°C to +70°C)
  • Operating Humidity: 5% to 95%, non-condensing
  • Operating Altitude: 1060 mbar to 500 mbar pressure, -1000 ft to 18,000 ft (-304 m to 5,486 m)
Display / Indicator
  • Data display: %SpO2, pulse rate, pleth waveform, perfusion index, alarm status, trends, sensitivity, FastSat, Signal IQ.
  • Display color: Blue
  • Type: Backlit LCD
  • Pixels: 480 x 160 dots
  • Dot pitch: 0.25 mm
Output Interface
  • Philips Vuelink, Spacelabs Universal Flexport, RadNet TM, (models RDS- 1/1B,RDS-3)
Mode
  • Average Mode: 2, 4, 8,10,12,14 or 16 seconds 7
  • Sensitivity: Normal, APOD and Maximum 8
Resolution
  • Saturation (%SpO2):1%
  • Pulse Rate (bpm): 1 bpm
Pulse Rate Accuracy
  • Pulse Rate: 25-40 bpm
    • No Motion: Adults, Pediatrics, Neonates: ±3 digits
    • Motion: Adults, Pediatrics, Neonates: ±5 digits
    • Low Perfusion: Adults, Pediatrics, Neonates: ±3 digits
Alarms
  • Audible and visual alarms for high and low saturation (1% to 100%), pulse rate (25 – 240bpm), sensor condition, system failure and low battery
]]> GE DASH 3000 https://www.meqube.com/product/ge-dash-3000/ Fri, 21 Jan 2022 13:19:20 +0000 https://www.meqube.com/?post_type=product&p=704 Features The GE Dash 3000 is a portable patient monitor. Its lightweight, durable design makes it perfect for both transport and bedside monitoring. The Dash 3000 comes with options for wired and wireless networking to the facility's computer systems. The Dash patient monitor can monitor many different parameters at the same time, some of these include 3 to 5 lead ECG, Pulse Oximetry, non-invasive blood pressure, temperature, and cardiac output. The Dash 3000 has an 8.4-inch color LCD screen where you can view 3 or 6 waveforms and battery capacity on the screen all at once. The GE Dash 3000 comes with two batteries that can provide up to 5 hours of running time and can be recharged within 2 to 4 hours. The batteries can be charged one at a time as to lose any functionality of the monitor while charging.
  • Networking options for both wired and wireless
  • 3 to 6 waveform and up to 4 pressure can be views at once
  • 4-5 hours of running battery time
  • Multi-lead ECG analysis and DINAMAP NIBP technology all in one monitor
  • seamless Patient Data transfer to Facilities computer system
]]>

Specifications

Dimensions
  • Height: 10.23 in (26 cm)
  • Depth: 7.8 in (20 cm)
  • Width: 11 in (28 cm)
  • Weight: 12 lbs (5.5 kg)
Display
  • Size: 22 cm (diagonal).
  • Type: active-matrix color TFT.
  • Resolution: 640 x 480 pixels.
  • Number of traces: 6 maximum.
  • Number of seconds/trace: 4.9 at 25 mm/sec.
  • Sweep Speed: 6.25, 12.5, 25 mm/sec (with erase bar).
  • Information window: displays non-real-time information without obstructing the display of real-time information.
  • Display organization: prioritized by parameter.
Controls
  • Trim Knob® control.
  • Five hard keys: Silence Alarm, Graph Go/Stop, NIBP Go/Stop, function (zero all) and Power On/Off.
Alarms
  • Categories: patient status and system status.
  • Priority: 4-levels crisis, warning, advisory, message.
  • Notification: audible and visual.
  • Settings: default or user-defined.
  • Silencing: 1 minute, current alarm only.
  • Pause: 5 minutes in adult ICU mode, 3 minutes in Neonatal ICU mode, and 5, 15, minutes or permanent pause in OR mode.
ECG
  • Standard leads available: I, II, III, V, aVR, aVL, and aVF.
  • Leads analyzed simultaneously: I, II, III and V (multi-lead).
  • Lead fail: identifies failed lead.
  • Alarms: user-selectable upper and lower heart rate limits.
Respiration
  • Measurement technique: impedance variation detection. Range respiration rate: 0-200 breaths per minute. User-selectable upper and lower respiration rate limits, and user-selectable apnea limit.
Temperature
  • Number of channels: 2.
  • Resolution: ±0.1°C.
  • Alarms: user-selectable upper and lower limits for T1, T2.
Invasive Blood Pressure
  • Number of channels: 2.
  • Range: -25mmHg to 300mmHg.
  • Alarms: user-selectable upper and lower limits for systolic, diastolic, and mean pressures.
NIBP
  • Measurement technique: oscillometric.
  • Displayed parameters: systolic, diastolic, and mean pressures, time of last measurement.
  • Measurement modes: manual, auto, and stat in Adult ICU and OR modes, manual and auto in neonatal mode.
  • Systolic range: 30-275 mmHg adult, 30-235 mmHg pediatric, 30-135 mmHg neonate.
  • Diastolic range: 10-220mmHg adult, 10-220mmHg pediatric, 10-110 mmHg neonate.
Pulse Oximetry
  • Parameters monitored: SpO2 and peripheral pulse rate.
  • SpO2 range: 50-100%.
  • PPR range: 30-300 beats per minute.
  • SpO2 accuracy: ±2%, 70 – 100% SpO2, ±3% (50-69% SpO2).
  • PPR Accuracy: ±3 beats per minute.
]]> GE DASH 4000 https://www.meqube.com/product/ge-dash-4000/ Fri, 21 Jan 2022 12:15:53 +0000 https://www.meqube.com/?post_type=product&p=700 Features The GE DASH 4000 is a portable patient monitor that has capabilities to measure ECG, NIBP, SpO2 along with many other perimeters. The Dash 4000 can connect to the GE Carescape network either wired or wireless. The GE Dash 4000 patient monitor comes with a large 10.4-inch color screen. The GE Dash Monitor also offers 12-lead 12sl, EK-Pro arrhythmia, ST-Segment analysis, and A-fib Detection. With these advanced parameters, the GE Dash 4000 can deliver personalized care for each patient's situation. The Dash's lightweight and durable design makes it ideal for any situation including transport, ER, Surgical Centers, and the ICU.
  • Unmatched adaptability at the bedside.
  • Modular flexibility
  • Revolutionary chest pain care
  • Early intervention in the NICU
  • Gold standard NIBP accuracy
  • Options: Agent Monitoring
]]>

Specifications

Dimensions
  • Height: 10.7 in (27.4 cm.)
  • Depth: 9.5 in (24.3 cm.)
  • Width: 11.5 in (29.3 cm.)
  • Weight: 5.7 kg
Display
  • Size: 26 cm (diagonal).
  • Type: active-matrix color TFT.
  • Resolution: 640 by 480 pixels.
  • Number of traces: 6 maximum.
  • Number of seconds/trace: 4.9 at 25 mm/sec.
  • Sweep speed: 6.25, 12.5, 25 mm/sec (with erase bar).
  • Information window: displays non-real-time information without obstructing the display of real-time information.
  • Display organization: prioritized by parameter.
Controls
  • Trim Knob® control.
  • Five hard keys: silence alarm, graph go/stop, function (zero all) and power on/off.
Alarms
  • Categories: patient status and system status.
  • Priority: 4 levels – crisis, warning, advisory, and message.
  • Notification: audible and visual.
  • Setting: default and individual.
  • Silencing: 1 minute, current alarm only.
  • Pause: 5 minutes in adult ICU mode, 3 minutes in neonatal ICU mode, and 5,15, or permanent pause in OR mode.
  • Volume: default 70%, 70 dB measured at 1 meter.
ECG
  • Standard leads available: I, II, III, V, aVR, aVL, and aVF. 10
  • lead wire cable: I, II, III, V, aVR, aVF, V2, V3, V4, V5, V6.
  • Leads analyzed simultaneously: I, II, III, and V (multi-lead mode).
  • Lead fail: identifies failed lead.
  • Alarms: user-selectable upper and lower heart rate limits.
Input Specifications
  • Voltage range: ±0.5 mV to ±5 mV.
  • Signal width: 40 ms to 120 ms (Q to S).
  • Heart rate range: 30 to 300 bpm.
  • Input impedance: common mode > 10 Mat 50/60 Hz, differential > 2.5 Mfrom dc to 60 Hz.
  • Common mode rejection: 90 dB minimum at 50 or 60 Hz
Respiration
  • Measurement technique: impedance variation detection.
  • Range respiration rate: 0 – 200 breaths per minute.
  • Base impedance: 100 – 1000 Ωat 52.6 kHz.
  • Detection sensitivity: 0.4 to 10 Ωvariation.
  • Waveform display bandwidth: 0.1 to 1.8 Hz (-3 dB).
  • Alarms: user-selectable upper and lower respiration limits, and user-selectable apnea limit.
Temperature
  • Number of channels: 2.
  • Input specifications – probe type: YSI series 400 or 700,
  • temperature range: 0°C to 45°C (32°F to 113°F),
  • resolution: ±0.1°C.
  • Output specifications – parameters displayed: T1, T2,
  • accuracy: ±0.1°C for YSI series 4000 probes, ±0.3°C for YSI series 7000 probes, independent of source.
  • Alarms: user-selectable upper and lower limits for T1 and T2.
Invasive Blood Pressure
  • Number of channels: 2 (optional).
  • Transducer sites: arterial, femoral artery, pulmonary arterial, central venous, right atrial, left atrial, intracranial, and special.
  • Transducer requirements: 5 Vdc±0.1% excitation voltage.
  • Transducer output: 5 μV/V/mmHg. Input specifications – range: -25 mmHg to 300 mmHg, offset: ±150 mmHg.
  • Output specifications – frequency response: dc to 50 Hz (-0/+2 Hz).
  • Zero balance range: ±150mmHg.
  • Zero balance accuracy: ±1mmHg.
  • Zero balance drift: ±1mmHg over 24 hours.
  • Accuracy: ±2% or ±1mmHg, whichever is greater.
  • Alarms: user- selectable upper and lower limits for systolic, diastolic, and mean pressures.
NIBP
  • Measurement technique: oscillometric.
  • Displayed parameters; systolic, diastolic, and mean pressures.
  • Systolic: 30-275 mmHg adult, 30-235 mmHg pediatric, and 30-135 mmHg neonate.
  • Diastolic: 10-220 mmHg adult, 10-220 mmHg pediatric, and 10-110 mmHg neonate.
  • MAP: 20-260 mmHg adult, 20-260 mmHg pediatric, and 20-125 mmHg neonate.
  • Pulse rate, as displayed in tabular trends: 30-200 bpm adult, 30-200 bpm pediatric, and 30-200 bpm neonate
Pulse Oximetry
  • Parameters monitored: arterial oxygen saturation (SpO2) and peripheral pulse rate (PPR).
  • SpO2range: 50 –100%. PPR range: 30-300 beats per minute.
  • SpO2 accuracy: ±2% (70-100%) and ±3% (50- 69%).
  • PPR accuracy: ±3 beats per minute.
  • Alarms: user-selectable upper and lower limits for SpO2 and PPR.
CO2
  • Information displayed: inspired and expired CO2 concentrations in %, mmHg, or kPa, respiratory rate, and continuous CO2 waveform.
  • Measurement ranges: PiCO2/FiCO2: 0 to 100 mmHg/0to13%. Pe CO2/ Fe CO2: 0 to 100 mmHg/0 to 13%;
  • RR: 0 to 120 breaths/min.
  • Accuracy: CO2: 5% of reading or ±2 mmHg, whichever is greater.
  • Display resolution: 1 mmHg. Rise time: less than 60 msec.
  • Respiration rate accuracy: ± breath/min
]]> GE DASH 5000 https://www.meqube.com/product/ge-dash-5000/ Fri, 21 Jan 2022 12:01:11 +0000 https://www.meqube.com/?post_type=product&p=695 Features The GE Dash 5000 is a portable patient monitor. It has a built-in writer and can connect to the CARESCAPE network. It can connect with an optional wireless card, or by a wired ethernet connection. This Dash monitor unit can be used to monitor ECG, NIBP, impedance respiration, SpO2, and temperature. This Dash monitor optionally can monitor invasive pressure, BISx, and EtCO2.
  • Mainstream and low-flow sidestream CO2 measurement options for neonatal patients and adults.
  • Highly configurable. Add features and parameters for different acuity levels.
  • Advanced algorithms for all parameters.
  • 12.1-inch display.
  • Multiple mounting solutions.
  • Wired or wireless ECG acquisition.
]]>

Specifications

Dimensions
  • Height: 11.3 in (28.7cm)
  • Width: 12.2 in (30.7 cm)
  • Depth: 9.4 in (23.9 cm)
  • Weight: 14 lbs. (6.4 kg)
Battery
  • Type: Exchangeable Lithium-Ion
  • Number of Batteries: Up to 2
  • Weight: 0.8 lbs (0.36 kg) each
  • Voltage: 11.1 V (nominal)
  • Capacity: 3520 mAh
  • Charge Time: Less than 4 hours each
  • Run Time: 2.5 hours (5.0 hours with 2)
Recorder
  • Method: Thermal dot array
  • Horizontal Resolution: 480 dots/in
  • Vertical Resolution: 200 dots/in
  • Waveform Channels: 4
  • Paper Width: 1.97 in (50 mm)
  • Paper Length: 100 ft (30 m)
  • Paper speed: 0.1, 0.5, 1, 5, 10, 12.5, 25, and 50 mm/sec
Display
  • Size: 12.1 in diagonal
  • Type: Color LCD
  • Resolution: 800×600 pixels
  • Number of Traces: 6
  • Sweep Speed: 6.25, 12.5 or 25 mm/sec
  • Parameter Blocks Displayed: Up to 10
Controls
  • Standard: Trim knob control plus 5 hard keys: Power, NBP Auto, Zero All, Silence Alarm/Admit, Print
ECG
  • 5 Leadwire Cable: I, II, III, V, aVR, aVL, and aVF
  • 10 Leadwire Cable (12SL option): V2, V3, V4, V5 and V6
  • Voltage Range: ±0.5 mV to ±5 mV
  • Signal Width: 40 ms to 120 ms (Q to S)
  • Heart Rate Range: 30 to 300 BPM
  • Accuracy: ±1% or ±1BPM whichever is greater
Invasive Blood Pressure (Optional)
  • Channels: 2
  • Transducer Sites: ART, FEM, PA, CVP, RA, LA, ICP, SP. In neonatal mode UCA, and UVC.
  • Range: -25 mmHg to 300 mmHg
  • Offset: ±150 mmHg
Noninvasive Blood Pressure
  • Technique: Oscillometric
  • Displayed Parameters: Systolic, diastolic, and mean pressures, time of last measurement
  • Modes: Manual, auto, and stat in adult and OR modes; manual and auto in neonatal mode
  • Systolic Pressure Range: Adult: 30 to 285 mmHg; Pediatric: 30 to 235 mmHg; Neonatal: 30 to 140 mmHg
  • Diastolic Pressure Range: Adult: 10 to 220 mmHg; Pediatric: 10 to 210 mmHg; Neonatal: 10 to 110 mmHg
  • Mean Pressure Range: Adult: 20 to 260 mmHg; Pediatric: 20 to 220 mmHg; Neonatal: 20 to 125 mmHg
  • Cuff Pressure Range: Adult: 294 ± 6 mmHg; Pediatric: 250 ± 5 mmHg; Neonatal: 147 ± 3 mmHg
  • Heart Rate Detection: 30 to 200 beats per minute
BIS – Bispectral Index
  • Technology: Supports Aspect Medical BIS-x technology
  • Information Displayed: BIS, SQI, SR and SEF, EEG waveform
  • BIS Range: 0-100
  • Signal Quality Index (SQI) Range: 0-100
  • Suppression Ratio (SR) Range: 0-100%
  • Spectral Edge Frequency (SEF) Range: 0-30
  • Alarms: User selectable upper and lower BIS limits.
SpO2
  • GE Pulse Range: Saturation: Pulse Rate: 0 – 100% SpO2; 30 – 250 beats per minute
  • Masimo SET Range: Saturation: 30 to 100% SpO2; Pulse Rate: 25 to 240 beats per minute; Perfusion: 0.02 to 20%
  • Nellcor Range: Saturation: 1 to 100% SpO2; Pulse Rate: 20 to 250 beats per minute; Perfusion: 0.03 to 20%
Cardiac Output (CO)
  • Range: Cardiac Output: 0.2 – 15 liters per minute; Blood Temperature: 30 – 42°C; Injectate Temperature: 0 – 30°C
Respiration
  • Range: Respiration rate: 0 – 200 breaths per minute; Base impedance: 100 – 1000 Ω at 52.6 kHz excitation frequency; Detection sensitivity: 0.4 to 10 Ω variation
Temperature
  • Temperature Range: 0°C to 45°C (32°F to 113°F)
  • Display Resolution: ±0.1°C
  • Accuracy: ±0.1°C (25°C to 45°C) independent of sensor
Carbon Dioxide (CO2)
  • Measurement Technique: Non-dispersive infrared absorption, dual wavelength ratiometric
  • Sensor Type: Novametrix Medical Systems’ Capnostat III
  • Measurement Ranges: Pi CO2/Fi CO2: 0 to 100 mmHg/0 to 13%; Pe CO2/Fe CO2: 0 to 100 mmHg/0 to 13%; RR: 0 to 120 breaths/min
]]> PHILIPS VM 8 https://www.meqube.com/product/philips-vm-8/ Fri, 21 Jan 2022 11:08:12 +0000 https://www.meqube.com/?post_type=product&p=691 Features The Philips SureSign VM8 is a part of the Philips VM series patient monitors. The VM8 is a compact patient monitor that is only 8 pound, making flexible to fit any situation. The monitor can go from a bedside monitor to a transport monitor in seconds. The monitor can measure multiple parameters; 3-5 lead ECG, SpO2, temperature, non-invasive blood pressure, respiration, and basic arrhythmia. The monitor is used on patients ranging from neonates to adults. The color 10-inch color display screen shows up to 4 different waveforms at a time. The system can store up to 96 hours of trending data. The SureSigns VM 8 comes with a USB port making it easy to maintain and update the software.  
  • A multi-parameter monitor is suitable for use in adult, pediatric and neonatal care settings.
  • The portable design features an integrated bed rail hanger and carrying handle.
  • Bright, easy to read display panel shows up to four waveforms.
  • Fixed keys for quick and efficient operation.
  • Choose between three or five-lead ECG, with pulse detection and safety alarms.
  • Pacemaker and arrhythmia detection
  • Philips SpO2 is compatible with all patient sensors by Nellor or Masimo
  • Various Non-Invasive Blood Pressure modes: manual, interval, and STAT.
  • Store up to 96 hours of measurement trends on one monitor.
  • Complete software upgrades easily with a USB port.
  • Optional — On-board bar-code scanner for quick patient ID entry.
  • Optional — Microstream EtCO2 for intubated and non-intubated patients.
  • Optional — Printer for paper documentation.
]]>

Specifications

Dimensions
  • Height: 10.6 in (27 cm)
  • Width:12.6 in (32 cm)
  • Depth: 6.9 in (17.5 cm)
  • Weight: 3.5 kg (7.7 lbs) excluding optional recorder and CO2
Screen
  • Screen type: 26.4 cm (10.4”) SVGA TFT-AM LCD display
  • Display resolution: 800 active pixels/line, 600 active lines/frame
  • Screen active area: 211.2 mm x 158.4 mm (8.31” x 6.24”)
  • Screen refresh frequency: 60 Hz
  • Pixel size: 0.264 mm (inch)
  • Viewing angle: approx. 60 °
  • Alarm Audio Range: 45 – 85 dB
  • System Response Time: 1 sec
Electrical
  • Internal battery: Lithium-ion, Smart battery 10.9 V to 11.1 V, 7200 mAhr
  • Battery operating time (new, fully charged): 4 hr
  • Battery charge time: 4 hr
  • Internal power supply: 100 to 240 VAC
  • Power consumption: 72 W
  • Frequency: 50/60 Hz
Recorder
  • Recorder type: Thermal
  • Paper width: 58 mm (inch)
  • User Selectable Speeds: 6.25, 12.5, 25, and 50 ml/s
Environmental
  • Mechanical Shock: Complies with mechanical shock requirement in ISO 9919 standards for use within the healthcare facility.
  • Mechanical Vibration: Complies with mechanical vibration requirement in ISO 9919 standards for use within the healthcare facility.
  • Operating temperature: 10 to 40 °C (50 to 104 °F)
  • Storage temperature (device): -20 to 50°C (-4 to 122 °F)
  • Storage temperature (device plus accessories): -20 to 40°C (-4 to 104 °F)
  • Operating humidity: Up to 80% RH, non-condensing
  • Storage humidity: Up to 90% RH, non-condensing
  • Altitude: Up to 3000 meters above sea level
ECG
  • Heart rate range: 15 to 300 beats per minute
  • Heart rate accuracy: Greater of ±10% or ±5 bpm
  • Bandwidth (normal monitoring): 0.67 to 40 Hz
  • Bandwidth (filtered monitoring): 0.67 to 20 Hz
  • Leads: 3-lead and 5-lead (user-selectable)
  • Display sweep speeds: 12.5, 25, and 50 ml/s
  • Pacemaker detection: Indicator on waveform display (user-selectable)
  • ECG size (sensitivity): 2.0, 1.0, 0.5 or 0.25 cm/mV or Auto
  • Lead Off condition: Detected and displayed
  • Input impedance: Signal reduction is less than 20% in the 0.67 to 40 Hz bandwidth
  • Input signal range: ±5 mV
]]> PHILIPS VM 4 https://www.meqube.com/product/philips-vm-4/ Fri, 21 Jan 2022 10:48:12 +0000 https://www.meqube.com/?post_type=product&p=686 Features The Philips SureSigns Vm4 is a portable patient monitor that can also monitor vital signs. The SureSigns VM4 monitor measures ECG, SpO2, non-invasive blood pressure, Hear rate, arrhythmia, pulse rate, temperature, and respiration. The monitor comes with an 8-inch color display screen that can display up to 3 waveforms at once. The patient monitor can store up to 96 hours of trending data. The Philips SureSign VM4 offers 6 hours of continuous battery life before needing to be charged.
  • 8 inch, bright, backlit Led display screen
  • Audible and visual alarms with nurse call output
  • 4 Display Modes: Numeric, Numeric with waveforms, Tabular Trent, Graphical Trend
  • Stores up to 96 hours of trending data
]]>

Specifications

Dimensions
  • Height: 8.6 in ( 22 cm)
  • Width: 10.2 in ( 26 cm)
  • Diameter: 5.7 in ( 14.5 cm)
  • Weight: 3.0 kg (6.6 lbs) excluding optional recorder and temperature module
Physical Specifications
  • Screen type: 21.3 cm (8.4”) SVGA TFT-AM LCD display
  • Display resolution:800 active pixels/line, 600 active lines/frame
  • Screen active area: 170.4 mm x 127.8 mm (6.71” x 5.03”)
  • Screen refresh frequency: 60 Hz
  • Pixel size: 0.213 mm (inch)
  • Viewing angle: approx. 60 °
  • Alarm Audio Range: 45 – 85 dB
  • System Response Time: 1 sec
Electrical Specifications
  • Internal battery: Lithium ion, Smart battery 10.9 V to 11.1 V, 7200 mAhr
  • Battery operating time (new, fully charged): 4 hr
  • Battery charge time: 4 hr
  • Internal power supply: 100 to 240 VAC
  • Power consumption: 72 W Frequency: 50/60 Hz
ECG
  • Heart rate range: 15 to 300 beats per minute
  • Heart rate accuracy: Greater of ±10% or ±5 bpm
  • Bandwidth (normal monitoring): 0.67 to 40 Hz
  • Bandwidth (filtered monitoring): 0.67 to 20 Hz
  • Leads: 3-lead
  • Display sweep speeds: 12.5, 25, and 50 ml/s
  • Pacemaker detection: Indicator on waveform display (user-selectable)
  • ECG size (sensitivity): 2.0, 1.0, 0.5 or 0.25 cm/mV or Auto
  • Lead Off condition: Detected and displayed
  • Input impedance: Signal reduction is less than 20% in the 0.67 to 40 Hz bandwidth
  • Input signal range: ±5 mV
Enviromental Specifications
  • Operating temperature: 10 to 40 °C (50 to 104 °F)
  • Storage temperature (device): -20 to 50°C (-4 to 122 °F)
  • Storage temperature (device plus accessories):-20 to 40°C (-4 to 104 °F) Operating humidity: Up to 80% RH, non-condensing
  • Storage humidity: Up to 90% RH, non-condensing
  • Altitude: Up to 3000 meters above sea level
Temperature Measurements
  • Measurement range – monitored mode: 26.7 to 43.3 °C (80 to 110 °F)
  • Measurement range – predictive mode: 34.4 to 40.6 °C (93.9 to 105 °F)
  • Accuracy (monitored mode): ±0.1 °C (±0.2 °F)
  • Heating/Cooling transient response time: ≤150 sec
  • Measurement time: 4 s (Oral); 16 s (Axillary and rectal) sec
  • Resolution: 0.1 °C (0.2 °F)
SPO2
  • Measurement range: 0 to 100 %
  • Pulse rate: 30 to 300 beats per minute
  • SpO2 accuracy: 70 to 100% (exact accuracy depends on a sensor) %
  • Pulse rate accuracy: Greater of 2% or ±1 bpm
  • Wavelength range: 500 to 1000 nm for all specified sensors nm
  • Maximum optical output power: ≤15 mW for all specified sensors mW
Non-invasive Blood Pressure
  • Technique:Oscillometric using stepwise deflation pressure
  • Adult measurement range – systolic: 30 mmHg to 270 mmHg (4.0 kPa to 36.0 kPa)
  • Initial cuff inflation – Adult: 160 mmHg (21.3 kPa)
  • Adult measurement range – diastolic: 10 mmHg to 245 mmHg (1.3 kPa to 32.7 kPa)
  • Adult measurement range – MAP: 20 mmHg to 255 mmHg (2.7 kPa to 34.0 kPa)
  • Adult measurement range – pulse rate: 40 to 300 beats per minute
  • Pediatric measurement range – systolic: 30 mmHg to 180 mmHg (4.0 kPa to 24.0 kPa)
  • Pediatric measurement range – diastolic: 10 mmHg to 150 mmHg (1.3 kPa to 20.0 kPa)
  • Initial cuff inflation – Pediatric: 140 mmHg (18.7 kPa)
  • Pediatric measurement range – MAP: 20 mmHg to 160 mmHg (2.7 kPa to 21.3 kPa)
]]> PHILIPS VM 6 https://www.meqube.com/product/philips-vm-6/ Fri, 21 Jan 2022 10:20:41 +0000 https://www.meqube.com/?post_type=product&p=681 Features The Philips SureSigns VM6 is a patient monitor that can also do vital signs. The SureSigns VM6 has a small compact design that makes it easy to move with the patient and can be used for all patients, neonates, pediatric and adults. The handheld monitor offers a bright LCD color screen to see all the parameters measured. The Display can show up to 4 different waveforms and numeric readings at once. The parameters include; non-invasive blood pressure, SpO2, Respiration, basic arrhythmia, and 3 or 5 lead ECG. The SureSigns VM6 offers a UBS port for exporting data and updating the internal software.
  • LCD Color Screen
  • Intuitive Navigation; making frequently used test easily available
  • Optional Recorder
  • Lithium Battery
  • Bright, color backlight screen
  • Audio and Visual alarm system
  • 4 display modes: Numeric, Numeric with wave form, Tabular Trend, Graphical Trend
  • Front panel icons show battery status
  • Stores up to 96 hours of trending data
  • Compatible with Adult, Pediatric and Neonatal patients
]]>

Specifications

Dimensions
  • Width: 26 cm
  • Height: 22 cm
  • Depth: 14.5 cm
  • Weight: 7.1 lbs
Display Screen
  • Size: 8.4 in/20.3 cm
  • Type: SVGA TFT-AM LCD
NBP
  • Oscillometric using stepwise deflation pressure
  • Adult/Pediatric Measurement Range: Systolic: 30–255 mmHg; Diastolic: 15–220 mmHg; Mean: 20–235 mmHg
  • Neonatal Measurement Range: Systolic: 30–135 mmHg; Diastolic: 15–110 mmHg; Mean: 20–125 mmHg
  • Blood Pressure Accuracy: ±5 mmHg
  • Pulse Rate Accuracy: ±2 bpm or ±2% (whichever is greater)
IBP (optional)
  • Range: [-40] – 360 mmHg
  • Accuracy: ±4 bpm or ±4% (whichever is greater)
SPo2
  • Meets EN ISO 9919 standard
  • Measurement Range: 0 – 100%
  • Accuracy: Depends on the sensor
ECG
  • 3 or 5-lead
  • Heart Rate Range: 15 – 300 bpm
  • Respiration Rate Range: 4 – 150 rpm
Temperature
  • Mode: Continuous
  • Method: Esophageal, rectal, or skin
  • Range: 25 – 45OC (77.0 – 113.0OF)
  • Accuracy: ±0.1OC
Battery
  • Lithium ion, 11.1V
  • Operating Time: 4 hours with continuous monitoring and NBPs every 15 minutes
Data Output
  • HL7 format, via Ethernet port
Patients
  • Adult, pediatric, neonatal
]]>